Forum
Notifications
Clear all
Topic starter
19/06/2025 2:25 pm
Hi,
Just did a fresh install with skudonet CE.
I'm able to configre the first NIC with IP 10.10.xx.110
But when I edit the second NIC and what to add 10.10.xx.111
it complains that this is already configured on ETH0?
20/06/2025 12:57 pm
Hi, this is not an issue, but a misunderstanding about how NICs work, the same network 10.10.10.0/24 only can be configured in one NIC interface, if you need more than one IP in the same network please use virtual INterfaces instead.
This issue will be closed as it is not an issue.
Regards!
