Network | Routing | Rules | Create

To create a routing rule in SKUDONET ADC:

1. 1. Go to the Network > Routing section.
   2. Click the Create routing rule button.
   3. Select the routing table to which to add the rule within the Table field.
   4. In the From field, enter an IP address or an IP subnet from where the frames should be received.
   5. Enter the Priority number for this rule. The lower the number, the higher the priority.
   6. Enter a comment that easily describes this rule in the Description field.
   7. Click the Apply button.

Next Article: Network | Routing | Tables